Sunday, June 25, 2017

The return of an old favorite, with a twist

Along with the Anglo-Dutch ships, I purchased a few miniatures for an era that I once played extensively - ACW naval:


These ships are part of a new series of ships from Thoroughbred Models.  Thoroughbred is well-known for their line of 1/600 ACW ships, and I once had quite a few.  They were sold years ago to make ends meet, but now I am ready to return to the genre except that my new collection will be in 1/1200 scale.


First up is CSS Arkansas:


Just 43mm or so in length, this model is a bit small but the detail is very nice.  This is a one-piece cast, although there is a flagstaff and flag included with the kit.

Here is a port bow shot:




Next is a Union 90-day gunboat:




This model is more complicated, with masts, bowsprit, foredeck, and a pair of separately-cast guns.


Following these is another Union vessel.  This one is an armed ferry:



Not a big ship at 37mm in length, but there is a lot of detail including a very nice 'walking beam' assembly for the engines.


Honestly, I find this project to be much less intimidating than the Anglo-Dutch ships, simply due to the greatly reduced amount of rigging needed per ship.  Some of these will required little to none.  Of course, once I get to USS Hartford, things will change!

Sunday, June 11, 2017

Anglo-Dutch naval, part 1

This is the start of my newest naval project; just a pair of ships but I find it to be very daunting.  The rigging of these ships will be the hard part for me to overcome!


Here is the first step - a pair of lovely 3rd rates in 1/1200 scale from Langton.  (Edit:  purchased from Waterloo Miniatures)  (and the ratlines are sold separately!).

Inside the box one will find:


Above are the parts for the Dutch 3rd rate (Langton AD19).  The hull is three pieces, while the masts and sails comprise a total of 15 pieces.  All of the wonderful details that one expects from a Langton miniature are here.





The parts of the English kit (Langton AD9) are similar.

Please note that these miniatures are not very large.  The pics above are on a ¼" (6.35 mm) grid.  The hulls are less than 2" (51mm) long overall.

Saturday, June 3, 2017

Been a while...

Sure has been a while since posting.  It has, sadly, been quite an eventful time.  For the major items, please go to my other blog and read this.  For the minor stuff, read on.

Simply put, I made a mistake that I do not think that I have ever done before.  While in a scramble to reorganize the place, boxes were shifted around and things thrown to the bin that should have not been.  Namely, the boxes with most of the ship miniatures went out - 1/1800, 1/2400, 1/3000, 1/6000 all gone.  Now, I did not have a large collection, but it was a shock to say the least and with the other issues going on it pained me to no end.

I did find a few ships that were stuffed into a different storage system.  What survived?  My Langton 1/1200 ancients ships, Figurehead 1/2400 Armada, and a few odd selections of Navwar 1/1200 ACW naval.  None of the figures are painted, and with the exception of the Armada collection nowhere near complete or even playable.

But, I think that I have a plan.  An order or two were made, some rules purchased from a well-known naval gamer's stand at Wargame Vault, and another attempt to get games going will be made.  No pics of the ships yet, as I am awaiting the last order to come in from Brookhurst Hobbies.

I found a couple of books also:


They look very interesting and I need to start in on them soon.

Saturday, April 9, 2016

WW1 German ships, part 2

With a little bit of spare time, I was able to make a little more progress with my WTJ 1/1800 ships. 


Magdeburg and Strassburg, and their masts.  I am not certain of the diameter of the brass rod used for the masts, but the yards are made of 0.006" brass wire (the long piece in the pic above).  Again, the mounting holes for the masts are printed into the WTJ cruisers, so just a bit of glue and in they go.



It is a different story with the TB's.  Their masts are also made from the thin brass wire, but I had to use a drill bit to make a hole for them.  I did not put yards on the masts for the TB's.



All of my 1/1800 ships now have their masts, although it is a bit hard to see from that angle.  Primer will make it much easier to see - more pics after that!

Saturday, April 2, 2016

WW1 Russian ships, part 3

Inspiration can strike suddenly, and this time I took advantage of the situation and worked on my WTJ ships a bit.


Here is my small flotilla of 1/1800 ships - German cruisers on the left, Russians on the right.  One can see that I have already primed the first Russian cruiser - Bogatyr - but I forgot one small detail... masts!  So, back to work.

I have some thin brass wire that I use for masts, and this time I decided to use plastic rod as well.

Before putting in the masts, I looked around for some pictures to help guide the work.  The WTJ ships have holes for masts already present in the model, in cruisers and larger at least, so siting the masts was not a problem, and I found a pair of pictures in one of my books - The Imperial Russian Navy by A.J. Watts - showing differences between Bogatyr and Oleg.  The book shows that Oleg has a slightly different bridge structure, without searchlight wings, and the masts are slightly different also.

In the pics below, one can just barely see the trimmed bridgework on Oleg, the rightmost cruiser.







Bogatyr from the bow






Oleg from the bow


It will be difficult to see the change until I get some primer on him.

And, some simple masts:



Bogatyr (the grey one) has slightly shorter masts, and Oleg has a lookout position on the mainmast.  I think, after the fact, that using the plastic rod is a bit off for the yards.  I will not repeat it with the German ships but the rest of the Russians will, except using the same brass rod as the masts.